PVC Flooring

You can easily learn how to lay PVC flooring, the steps to follow and the details. Here’s how to lay PVC flooring? The answer to the question and details…

In many colors, patterns and decors, PVC flooring is less heat conductive and also very easy to use. If the floor where PVC will be laid is flat and clean, even those who have never covered the floor of their room with PVC before can easily make the floor.

PVC can be applied on all kinds of dry, clean and smooth surfaces. However, since PVC floor coverings are waterproof, it should not be forgotten that the water and moisture present on the lower surface or that may appear later will be trapped here. For this reason, the necessary insulation should be done before starting PVC flooring on the ground floors. The substrate is clean and free from any dirt, dust, oil, paint, etc. It is very important that it is free.

First, measure the length and width of the space where you will lay the PVC using a tape measure and calculate how much PVC you will need.

Lay the rolled PVC on the floor in reverse so that it is flat and you can make the necessary cuts.

Cut the PVC according to the measurements you have taken with the help of a steel gauge and utility knife.

Turn over the front of the PVC you have cut and ready to be glued. Before gluing the PVC, apply a thin layer of glue with a trowel to the area where the PVC strip will be covered and glue the PVC.

Cut off the excess parts on the wall edges or furniture with the help of a utility knife.

Go over the floor with the help of a check pass. Take out any air trapped under the floor with a ground rust.

After this process is completed, place your skirtings on the wall edges and nail it to the wall with the help of a hammer.

Transition profiles must be used in the passages of rooms with different floors. There is no need to use profiles in the passages of rooms with the same style. If the coverings are to be laid in a certain part of the room, edge or closing profiles may also be required.

PVC COATING ON PVC COATING

It is generally not recommended to install PVC on pvc floor covering price. In these applications, some materials in the adhesive will come out to the top surface in a short time and may cause stains that cannot be removed.

Design a site like this with WordPress.com
Get started